Set The Download Control Right; Table 6-8 The Corresponding Mml Commands Of Setting The Download Control Right Versus The Bts Systems - Huawei 3900 Series Commissioning Manual

3900 Series Multi-Mode Base Station
Commissioning Guide
If the VSWR LED
is...
OFF
Blinking (ON for
0.125s and OFF for
0.125s)
ON
Blinking (ON for 1s
and OFF for 1s)
----End

6.5 Set the Download Control Right

If the BTS is working in the co-module scenario, the download control right needs to be set. The
system with the download control right upgrades the co-modulated RRU3908/MRFU and the
USCU software during software upgrade.
Prerequisite
l
l
Procedure
Step 1 Run the corresponding MML command to set the download control right according to the actual
system of BTS, see
Table 6-8 The corresponding MML commands of setting the download control right versus the
BTS Systems
BTS Systems
GSM
UMTS
LTE
----End
Issue 02 (2010-07-30)
It Indicates That... Then...
No VSWR alarm is
generated.
There are alarms on
the ANT_TX/RXA
port and ANT_RXB
port.
There is an alarm on
the ANT_TX/RXA
port.
There is an alarm on
the ANT_RXB port.
M2000 server/terminal is working properly, and M2000 is logged on.
The connection between BTS and M2000 is working properly. If the BTS is GSM BTS,
the connection between the BSC and M2000 needs to work properly.
Table 6-8.
MML Commands
SET BTSLOADCTRL
SET LOADCTRL
SET LOADCTRL
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Commissioning the MBTS by Using USB and M2000
Wait till the transmission is available.
Check whether the antenna system is properly
connected to the MRFU or RRU3908.
If the fault persists, record the fault and the
LED status in the
Commissioning. Then, rectify the fault on the
LMT or M2000.
7.10 Data Sheet for
6-25