Figure 7-32 Download And Activate Software Interface - Huawei 3900 Series Commissioning Manual

7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
l
l
l
Procedure
Step 1 In the MML interface on the LMT, run the command to query the active eNodeB software
version.
If...
The active software version is the target
software version
The active software version is not the target
software version
Step 2 On the LMT, click the Software Management button. The Software Management tab page is
displayed.
Step 3 In the navigation tree, double-click Download and Activate Software. The Download and
Activate Software interface is displayed, as shown in

Figure 7-32 Download and Activate Software interface

Step 4 Select the tasks to be performed according to step
tasks.
If a task is not selected, the eNodeB skips the task and proceeds with the next task.
7-40
The FTP server functions properly and is connected to the eNodeB on the same network
segment.
The FTP user can access the specified directory.
There is no firewall between the FTP server and the eNodeB.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3900 Series Multi-Mode Base Station
Then...
Download and activate only the data
configuration file.
Download the eNodeB software and data
configuration file, and then activate the data
configuration file and eNodeB software in
sequence.
Figure 7-32.
step 1 and set the parameters related to the
Commissioning Guide
Issue 02 (2010-07-30)