Fuses (Iec); Ur And Ar Fuse - ABB ACS560 Hardware Manual

Check the network compatibility restrictions above 2000 m (6562 ft), see section
site altitude (page 126).

Fuses (IEC)

gG as well as uR or aR fuses for protection against short-circuit in the input power cable or
drive are listed below. Either fuse type can be used for frames R0...R8 if it operates rapidly
enough. The operating time depends on the supply network impedance and the
cross-sectional area and length of the supply cable.
Note 1: See also (page
Note 2: Fuses with higher current rating than the recommended ones must not be used.
Note 3: Fuses from other manufacturers can be used if they meet the ratings and the melting
curve of the fuse does not exceed the melting curve of the fuse mentioned in the table.
￭

uR and aR fuse

Drive type
Minimum
ACS560
short cir-
cuit cur-
rent
A
3 phases U = 400 V (380...480 V)
N
02A6-4 48
03A3-4 48
04A0-4 80
05A6-4 80
07A2-4 128
09A4-4 128
12A6-4 200
017A-4 256
025A-4 320
033A-4 TBA
039A-4 TBA
046A-4 TBA
062A-4 380
073A-4 480
088A-4 480
106A-4 700
145A-4 1000
169A-4 1280
206A-4 1520
55).
Input cur-
rent
Rated cur-
rent I
1)
A A
4.2 25
5.3 25
6.4 32
9.0 32
11.5 40
15.0 40
20.2 50
27.2 63
40.0 80
32.0 63
38.0 63
45.0 80
61.0 100
72.0 125
87.0 160
105 200
145 250
169 315
206 350
uR and aR
2
I t Rated
voltage
N
2
A s V
125 690
125 690
275 690
275 690
490 690
1000 690
1800 690
3600 690
1450 690
1450 690
2550 690
4650 690
8500 690
16000 690
15000 690
28500 690
46500 690
68500 690
105000 690
Technical data 111
Installation
Bussmann IEC 60269
designation size
type
170M2694 00
170M2694 00
170M2695 00
170M2695 00
170M2696 00
170M2696 00
170M2697 00
170M2698 00
170M2699 00
170M1565 000
170M1565 000
170M1566 000
170M1567 1
170M1568 000
170M1569 1
170M3815 1
170M3816 1
170M3817 1
170M3818 1