ABB ACS560 Hardware Manual page 131

Point of measurement
Low voltage
Equipment
2. An EMC plan for preventing disturbances is drawn up for the installation. A template is
available from the local representative.
3. The motor and control cables are selected as specified in this manual.
4. The drive is installed according to the instructions given in this manual.
WARNING!
A drive of category C4 is not intended to be used on a low-voltage public network
which supplies domestic premises. Radio frequency interference is expected if
the drive is used on such a network.
Medium voltage network
Neighbouring network
Equipment
(victim)
Supply transformer
Static screen
Low voltage
Equipment
Technical data 131
Drive