ABB ACS560 Hardware Manual page 47

1. Mark the punch positions for the six mounting holes with the mounting template
included in the package. Do not leave the mounting template under the drive.
The drive dimensions and hole locations are also shown in the drawings, see
chapter Dimension drawings
50 Mechanical installation
50 Mechanical installation 50 Mechanical installation
Note: You can use only two screws instead of four to attach the lower part of the
drive.
Installing the drive vertically, frames size Installing the drive vertically, frames size Installing the drive vertically, frames size
1. Mark the punch positions for the six mounting holes with the mounting template 1. Mark the punch positions for the six mounting holes with the mounting template 1. Mark the punch positions for the six mounting holes with the mounting template
included in the package. Do not leave the mounting template under the drive. included in the package. Do not leave the mounting template under the drive. included in the package. Do not leave the mounting template under the drive.
The drive dimensions and hole locations are also shown in the drawings, see The drive dimensions and hole locations are also shown in the drawings, see The drive dimensions and hole locations are also shown in the drawings, see
chapter chapter chapter Dimension drawings Dimension drawings Dimension drawings
Note: You can use only two screws instead of four to attach the lower part of the Note: You can use only two screws instead of four to attach the lower part of the Note: You can use only two screws instead of four to attach the lower part of the
drive. drive. drive.
× 4
2. Drill the mounting holes.
3. Start the screws or bolts into the mounting holes.
4. Position the drive onto the screws on the wall. Lift the drive with another person
as it is heavy.
2. Drill the mounting holes.
5. Tighten the screws in the wall securely.
3. Start the screws or bolts into the mounting holes. 2. Drill the mounting holes. 2. Drill the mounting holes. 2. Drill the mounting holes.
4. Position the drive onto the screws on the wall. Lift the drive with another person as it is
3. Start the screws or bolts into the mounting holes. 3. Start the screws or bolts into the mounting holes. 3. Start the screws or bolts into the mounting holes.
2
heavy.
4. Position the drive onto the screws on the wall. Lift the drive with another person 4. Position the drive onto the screws on the wall. Lift the drive with another person
4. Position the drive onto the screws on the wall. Lift the drive with another person
5. Tighten the screws in the wall securely.
as it is heavy. as it is heavy. as it is heavy.
5. Tighten the screws in the wall securely. 5. Tighten the screws in the wall securely. 5. Tighten the screws in the wall securely.
2 2 2
6. Remove the front cover as follows:
on page 149.
1
R5
R5
mm in
mm in
a 612 24.1
on page 149. on page 149. on page 149.
b 581 22.9
a 612 24.1
c 160 6.3
b 581 22.9
d
300 11.8
e
200 7.9
1 1 1
c 160 6.3
R5 R5
mm
kg lb
mm mm in mm
d 300 11.8
a 160
a a 612 24.1 a 612 24.1 612 24.1
28 62
b b 581 22.9 b 581 22.9 581 22.9
e 200 7.9
b 473
c c 160 6.3 c 160 6.3 160 6.3
Weight kg
kg lb
d d d
300 300 11.8 300 11.8
e e e
200 200 7.9 200
28 62
14.86
kg kg lb kg
× 4 × 4 × 4
28 28 62 28
M8
3
× 2
M8 M8
3 3 3
× 2 × 2 × 2 × 2
Mechanical installation 47
R5...R8 R5...R8 R5...R8
R6 R7
R6 R7
mm in mm in mm
mm in mm
571 22.5 623 24.5 701 27.6
531 20.9 583 22.9 658 25.9
571 22.5 623
213 8.4 245 9.7 263 10.4
531 20.9 583
300 11.8 300 11.8 300
R3 R4
200 7.9 200 7.9 200
213 8.4 245
R5 R6 R6 R6 R7 R7 R7 R8
in mm
kg lb kg lb kg
in mm in mm in mm in mm in mm in mm in mm in mm in
300 11.8 300
6.30 160
571 22.5 623 24.5 701 27.6 571 22.5 623 24.5 701 27.6 571 22.5 623 24.5 701 27.6
45 99 55 121 70
200 7.9 200
531 20.9 583 22.9 658 25.9 531 20.9 583 22.9 658 25.9 531 20.9 583 22.9 658 25.9
18.62 619
213 8.4 245 9.7 263 10.4
213 213 8.4 8.4 245 245 9.7 263 10.4 9.7 263 10.4
lb kg
kg lb kg
300 11.8 300 11.8 300 11.8 300 11.8 300 11.8 300 300 11.8 300 11.8 300 11.8
7.9 200 7.9 200 7.9 200 7.9 200 7.9 200 7.9 200 200 7.9 200 7.9 200 7.9
45 99 55
32.77 23.0
lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb kg lb
62 62
45 45 99 45 99 55 99 55 121 55 121 70 121 70 154
4
× 2
M8
4 4 4
× 2 × 2
R8
R8
in
in mm in
24.5 701 27.6
22.9 658 25.9
11.8
7.9
9.7 263 10.4
R8 R8
in
lb
mm in in
11.8 300 11.8
6.30
154
7.9 200 7.9
24.37
lb
lb kg lb
11.8 11.8
7.9 7.9
121 70 154
50.72
kg lb lb
70 154 154
5
5 5 5