Terms And Abbreviations - ABB ACS560 Hardware Manual

Task
Commission the drive.

Terms and abbreviations

Term/ Description
Abbreviation
ACS-AP-x Assistant control panel
ACS-BP-S Basic control panel
AI Analog input; interface for analog input signals
AO Analog output; interface for analog output signals
Brake chopper Conducts the surplus energy from the intermediate circuit of the drive to the brake resistor
when necessary. The chopper operates when the DC link voltage exceeds a certain maximum
limit. The voltage rise is typically caused by deceleration (braking) of a high inertia motor.
Brake resistor Dissipates the drive surplus braking energy conducted by the brake chopper to heat
Control board Circuit board in which the control program runs
DC link DC circuit between rectifier and inverter
DC link capacit- Energy storage which stabilizes the intermediate circuit DC voltage
ors
DI Digital input
DPMP-02/03 Mounting platform for control panel (surface mounting)
DPMP-01 Mounting platform for control panel (flush mounting)
Drive Frequency converter for controlling AC motors
EFB Embedded fieldbus
FBA Fieldbus adapter
FCAN-01 Optional FCAN-01 CANopen adapter module
FCNA-01 Optional ControlNet™ adapter module
FECA-01 Optional EtherCAT adapter module
FENA-01 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols
FENA-11 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols
FENA-21 Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port
FPBA-01 Optional PROFIBUS DP adapter module
Frame, frame Physical size of the drive or power module
size
IGBT Insulated gate bipolar transistor
Intermediate DC circuit between rectifier and inverter
circuit
Inverter Converts direct current and voltage to alternating current and voltage.
LSW Least significant word
Macro A pre-defined set of default values of parameters in a drive control program.
NETA-21 Remote monitoring tool
Network control With fieldbus protocols based on the Common Industrial Protocol (CIPTM), such as DeviceNet
and Ethernet/IP, denotes the control of the drive using the Net Ctrl and Net Ref objects of the
ODVA AC/DC Drive Profile. For more information, see www.odva.org.
Parameter In the drive control program, user-adjustable operation instruction to the drive, or signal
measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed as an object, eg, variable,
constant, or signal.
PID/Loop con- Proportional–integral–derivative controller. Drive speed control is based
troller on PID algorithm.
Introduction to the manual 19
See
ACS560 standard control pro-
gram firmware manual
(3AXD50000044997 [English])