Required Tools; Moving The Drive; Unpacking And Examining Delivery, Frames R0 - ABB ACS560 Hardware Manual

R8
.
b
• Vertically side by side
• Vertically side by side
c = 0
a
b
Check the installation site according to the requirements below:
• The installation site is sufficiently ventilated or cooled to transfer away the drive losses.
See section Thermal losses, cooling data and noise (page
• The operation conditions of the drive meet the specifications given in section
conditions (page 126).
• The wall is as close to vertical as possible, of non-flammable material and strong enough
to carry the weight of the drive, see section
• The floor/material below the installation is non-flammable.
• There is enough free space above and below the drive to enable cooling air flow, service
and maintenance, See the required free space tables for each of the different mounting
alignments in Checking the installation site (page 38)

Required tools

To install the drive mechanically, you need the following tools:
• Drill with suitable bits.
• Screwdriver and/or wrench with a set of suitable bits (as appropriate for the installation
hardware used).
• Tape measure, if you are not using the provided mounting template.

Moving the drive

Frames R5...R8: Move the transport package by pallet truck to the installation site.
Unpacking and examining delivery, frames R0...R2
The figure below shows the drive package and its contents. Make sure that all items are
present and there are no signs of damage. Read the data on the type designation label of
155 6.1
Frame
size
a
Frame
Size
Above (a)
mm
R0
R0 75
R1
R1 75
R2 75
R2
R3 200
R3
R4 200
R4
R5 200
R5
R6 200
R6
R7 200
R7
R8 200
R8
R8 200
b
R8
300 11.8
Mechanical installation 39
Vertical installation side by side -
Vertical installation side by side -
Free space
Free space
Above (a) Below (b)
Below (b)
mm in mm
in mm in
75 3 75
3 75 3
75 3 75
3 75 3
3 75 3
75 3 75
7.9 200 7.9
200 7.9 200 7.9
7.9 200 7.9
200 7.9 200 7.9
7.9 200 11.8
200 7.9 200 11.8
7.9 300 11.8
200 7.9 300 11.8
7.9 300 11.8
200 7.9 300 11.8
7.9 300 11.8
200 7.9 300 11.8
7.9 300 11.8
200 7.9 300 11.8
3AXD10000561047.xls
116).
Circuit breakers (page
(or Circuit breakers (page
150 5.9
Between (c)
Between (c)
in mm in
mm in
3 0 0
0 0
3 0 0
0 0
0 0
3 0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
3AXD10000561047.xls
Ambient
114).
114)).