ABB ACS560 Hardware Manual page 122

122 Technical data
Analog outputs AO1 and AO2
(Term. 7 and 8)
Reference voltage output for
analog inputs +10V DC (Term.
4)
Safe torque off (STO) inputs
IN1 and IN2 (Term. 37 and 38) R
STO cable
Control panel - drive connec-
tion
Control panel - PC connection
a dip switch or see section
Current output: 0...20 mA, R
Voltage output: 0...10 V, R
Inaccuracy: ±1% of full scale (in voltage and current modes)
Max. 20 mA output
Inaccuracy: ±1%
24 V DC logic levels: "0" < 5 V, "1" > 13 V
: 2.47 kohm
in
Maximum cable length 300 m (984 ft) between activation switch (K) and drive
control board, see sections
data (page 156).
EIA-485, male RJ-45 connector, max. cable length 100 m
USB Type Mini-B, max. cable length 2 m
Switches (page 82).
: < 500 ohm
load
: > 100 kohm (AO1 only)
load
Wiring examples (page 149) and Safety