Degree Of Protection; Ambient Conditions - ABB ACS560 Hardware Manual

126 Technical data

Degree of protection

Ambient conditions

Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment. All printed circuit boards are conformal coated.
Installation site altitude
Air temperature
Relative humidity
Atmospheric pressure
Vibration (IEC 60068-2)
Vibration (ISTA)
Operation installed Storage in the pro-
for stationary use tective package
-
• 0 to 4000 m
(13123 ft) above
1)
sea level
• 0 to 2000 m (6561
ft) above sea
2)
level
above 1000 m (3281
ft), see section Alti-
tude derat-
ing (page 110).
-40 to +70 °C (-40 to
-15 to +50 °C (5 to
+158 °F)
122 °F). 0 to -15 °C
(32 to 5 °F): No frost
allowed. See section
i484355.
5 to 95% Max. 95%
No condensation allowed. Maximum allowed relative humidity is
60% in the presence of corrosive gases.
70 to 106 kPa 0.7 to 70 to 106 kPa 0.7 to
1.05 atmospheres 1.05 atmospheres
Max. 1 mm (0.04 in) -
(5 to 13.2 Hz), max.
2 2
7 m/s (23 ft/s )
(13.2 to 100 Hz) si-
nusoidal
- R0...R5 (ISTA 1A): Displacement, 25 mm
peak to peak, 14200 vibratory impacts
R6...R8ISTA 3E): Random, overall Grms
level of 0.52
Transportation in
the protective pack-
age
-
-40 to +70 °C (-40 to
+158 °F)
Max. 95%
60 to 106 kPa 0.6 to
1.05 atmospheres
-