Managing Device Address Tables; Viewing A List Of Device Address Tables - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 127: Serial Protocols Table
1. Add Button
3. Click Delete next to the chosen protocol.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 3.21.10

Managing Device Address Tables

The following sections describe how to configure and manage Device Address tables:
• Section 3.21.10.1, "Viewing a List of Device Address Tables"
• Section 3.21.10.2, "Adding a Device Address Table"
• Section 3.21.10.3, "Deleting a Device Address Table"
Section 3.21.10.1

Viewing a List of Device Address Tables

To view a list of Device Address tables configured for a serial port using the DNP protocol, navigate to interface »
serial » {slot/port} » protocols » dnp » setdnp » device-table, where {slot/port} is the slot name and port
number of the serial port. If Device Address tables have been configured, the DNP Device Address Table
Configuration table appears.
Figure 128: DNP Device Address Table Configuration Table
If no Device Address tables have been configured, add tables as needed. For more information, refer to
Section 3.21.10.2, "Adding a Device Address
Managing Device Address Tables
1 2 3
2. Edit Button 3. Delete Button
Table".
Chapter 3
Device Management
129