Deleting An Snmp User; Managing Snmp Security Model Mapping; Viewing A List Of Snmp Security Models - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
6.
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.11.7.3

Deleting an SNMP User

To delete an SNMP user, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » snmp » snmp-user. The SNMPv3 User Configuration table appears.
1
Figure 279: SNMPv3 User Configuration Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen user.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.11.8

Managing SNMP Security Model Mapping

The following sections describe how to configure and manage SNMP security models:
• Section 5.11.8.1, "Viewing a List of SNMP Security Models"
• Section 5.11.8.2, "Adding an SNMP Security Model"
• Section 5.11.8.3, "Deleting an SNMP Security Model"
Section 5.11.8.1

Viewing a List of SNMP Security Models

To view a list of SNMP security models configured on the device, navigate to admin » snmp » snmp-security-
to-group. If security models have been configured, the SNMP Security Model to Group Mapping table
appears.
272
3. Delete Button
RUGGEDCOM ROX II
User Guide
2
3
Deleting an SNMP User