Managing Snmp Group Access; Viewing A List Of Snmp Groups; Adding An Snmp Group - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
3. Click Delete next to the chosen security model.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.11.9

Managing SNMP Group Access

The following sections describe how to configure and manage SNMP group access:
• Section 5.11.9.1, "Viewing a List of SNMP Groups"
• Section 5.11.9.2, "Adding an SNMP Group"
• Section 5.11.9.3, "Deleting an SNMP Group"
Section 5.11.9.1

Viewing a List of SNMP Groups

To view a list of SNMP groups configured on the device, navigate to admin » snmp » snmp-access. If groups
have been configured, the SNMP Group Access Configuration table appears.
Figure 284: SNMP Group Access Configuration Table
If no SNMP groups have been configured, add groups as needed. For more information, refer to
"Adding an SNMP Group".
Section 5.11.9.2

Adding an SNMP Group

To add an SNMP group, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » snmp » snmp-access and click <Add snmp-access>. The Key Settings form
appears.
Managing SNMP Group Access
Chapter 5
Setup and Configuration
Section 5.11.9.2,
275