Chapter 5
Setup and Configuration
Section 5.38.5.1
Adding an IPv6 Network Prefix
To add a network prefix to the neightbor discovery configuration for an IPv6 address, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2.
Navigate to ip » {interface} » ipv6 » nd » prefix, where {interface} is the name of the routable interface.
3.
Click <Add prefix>. The Key Settings form appears.
Figure 918: Key Settings Form
1. IPv6 Prefix Box
4.
Configure the following parameter(s) as required:
Parameter
IPv6 Prefix
5.
Click Add to add the network prefix. The Lifetime and Prefix forms appear.
Figure 919: Lifetime Form
1. Valid Lifetime Box
798
1
2. Add Button
Description
The IPv6 network/prefix.
1
2
2. Preferred Lifetime Box
RUGGEDCOM ROX II
User Guide
2
Adding an IPv6 Network Prefix