View Mode - Siemens RX1500 User Manual

Chapter 2
Using ROX II
Figure 5: Modes Toolbar

1. View Mode

2. Edit Private Mode
IMPORTANT!
Switching from either of the edit modes to View mode does not close the current configuration session.
A configuration session can only be closed by pressing Exit Transaction on the edit toolbar.
View Mode
In View mode, users can view parameter settings, logs, graphs, and the status of each connected device.
Changes to ROX II are not permitted.
Edit Private Mode
Edit Private mode is the primary mode for most users who want to make changes to the device/network
configuration. It can be accessed by multiple Operator and Admin users.
All changes made during a private configuration session are hidden from other users until they are committed.
Each change must be committed before it is applied to the active system.
If a user opens an exclusive configuration session during another user's private configuration session, the user in
the private configuration session cannot commit their changes until the other user ends their session.
Edit Exclusive Mode
Edit Exclusive mode is similar to Edit Private mode, except all other users are blocked from committing
their changes until the user using Edit Exclusive mode exits. Only one Operator or Admin user can use Edit
Exclusive mode at a time per device.
In Edit Exclusive mode, a dialog box will appear whenever a user attempts to commit configuration changes
asking for a timeout period. Changes will be applied for the set period of time, after which the configuration will
be reset to its previous settings. This allows users to test their configuration changes before fully applying them to
the active system.
To cancel a commit before the time elapses and discard the changes, click Abort Commit.
To permanently commit the changes, click Commit before the time elapses.
IMPORTANT!
Always log out of Edit Exclusive mode or exit the transaction. If the session is terminated before
a user exits properly, other users logged in to the device will continue to be blocked from making
changes until the session timeout period expires.
18
1 2
3. Edit Exclusive Mode
3
RUGGEDCOM ROX II
User Guide
Modes