Chapter 5
Setup and Configuration
Parameter
Area Password
Area Authentication
Domain Authorization
Domain Password
Domain Authentication
6.
Add one or more Network Entity Titles (NETs). For more information, refer to
Network Entity Titles (NETs)"
7.
If necessary, configure intervals for the generation of Link-State Packets (LSPs). The default is 30 seconds.
For more information, refer to
8.
If necessary, configure refresh intervals for Link-State Packets (LSPs). The default is 900 seconds. For more
information, refer to
9.
If necessary, configure the minimum interval between consecutive SPF calculations. The default is 1 second.
For more information, refer to
10. If necessary, configure how long LSPs can reside in the device's Link State Database (LSDB) before they
are refreshed. The default is 1200 seconds. For more information, refer to
Lifetime of
LSPs".
11. If necessary, define rules for redistributing static, RIP, BGP or OSPF routes. For more information, refer to
Section 5.18.11, "Managing Redistribution Metrics"
12. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
13. Click Exit Transaction or continue making changes.
Section 5.18.4.3
Deleting an Area Tag
To delete an area tag for dynamic IS-IS routes, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2.
Navigate to routing » dynamic » isis » area. The Area Tag table appears.
416
Description
The area password to be used for transmission of level-1 LSPs.
Synopsis: send-only, validate
Default: send-only
The authentication option to be used with the area password on SNP PDUs. Default is
send-only.
Synopsis: clear, md5
Default: clear
The authorization type for the domain password. Default is clear.
The domain password to be used for transmission of level-2 LSPs.
Synopsis: send-only, validate
Default: send-only
The authentication option to be used with the domain password on SNP PDUs. Default
is send-only.
Section 5.18.6, "Managing LSP
Section 5.18.9, "Managing LSP Refresh
Section 5.18.7, "Managing SPF
Section 5.18.10, "Managing
Generation".
Intervals".
Calculations".
Section 5.18.8, "Managing the
RUGGEDCOM ROX II
User Guide
Deleting an Area Tag