Enabling/Disabling The Netconf Summary Log - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of ROX II. Only enable diagnostic logging when directed by Siemens.
To enable or disable the SNMP log, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to admin » logging » diagnostics. The SNMP Log form appears.
Figure 36: SNMP Log Form
1. Enabled Check Box
3. Configure the following parameter(s) as required:
Parameter
Enabled
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 3.9.3.3

Enabling/Disabling the NETCONF Summary Log

The NETCONF summary log briefly records NETCONF protocol transactions and, in particular, those which
completed successfully.
CAUTION!
Configuration hazard – risk of reduced performance. Enabling diagnostic logging will significantly affect
the performance of ROX II. Only enable diagnostic logging when directed by Siemens.
To enable or disable the NETCONF Summary log, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin » logging » diagnostics. The NETCONF Summary Log form appears.
Enabling/Disabling the NETCONF Summary Log
Description
Default: false
Enables/Disables SNMP logging to the snmp-trace.log.
Chapter 3
Device Management
47