User Permissions - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Services
RADIUS
L2TP
Section 1.5

User Permissions

The following table lists the operation, configuration, and action commands permitted to the administrator,
operator, and guest users.
Types of user access:
• Create (C) - can create and remove optional parameters
• Execute (E) - can run an action or command
• No - no read/write/execute access
• Read (R) - read access
• Update (U) - can modify existing parameter
Commands/Paths Permitted
config private | exclusive | no-confirm
/admin/software-upgrade
/admin/rox-imaging
/admin/authentication
/admin/authentication/password-complexity
/admin/logging
/admin/alarms (status)
/admin/alarms-config/
/admin/users
/admin/users/userid
/admin/cli
/admin/snmp
/admin/netconf
/admin/dns
/admin/webui
/admin/scheduler
User Permissions
Port Number
UDP/1812 to send, opens random port
to listen
Random Port
Administrator
Allowed
R/U
R/U
R/U
R/U
C/R/U
R
R/U
C/R/U
R/U
R/U
C/R/U
R/U
C/R/U
R/U
C/R/U
Port Open
Open (if configured)
Open (if configured)
Access
Operator Guest
Allowed No
No No
No No
No No
R No
No No
R No
R/U No
No No
R/U No
R/U No
No No
No No
No No
R/U No
No No
Port
Default
Closed
Closed
Notes
Administrator and operator can see status
of active-alarms, acknowledge and clear
alarms
Administrator and operator cannot create or
delete alarm-lists
Operator can only change own password
and cannot create users.
Chapter 1
Introduction
Access
Authorized
Yes
Yes
9