Configuring An E1 Line - Siemens RX1500 User Manual

Chapter 3
Device Management
Parameter
5. Add and configure channels for the T1 line. For more information, refer to
Channel".
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 3.24.7

Configuring an E1 Line

To configure E1 parameters for a WAN interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to interface » wan » {interface}, where {interface} is the WAN interface.
Click the + symbol in the menu next to e1. The E1 Parameters form appears.
3.
Figure 168: E1 Parameters Form
1. Frame List 2. Line Code List
4. Configure the following parameter(s) as required:
Parameter
frame
Line Code
160
Description
Line Build Out: tunes the shape of the T1 pulses and adjusts their amplitude depending
upon distances and the desired attenuation.
1
2
3
3. Clock List
Description
Synopsis: ncrc4, crc4
Default: ncrc4
The frame format.
Synopsis: hdb3
Default: hdb3
A line encoding/decoding scheme.
RUGGEDCOM ROX II
Section 3.24.9.2, "Adding a
Configuring an E1 Line
User Guide