Connectors On The Computer Unit - ABB IRC5 Product Manual

2.5.8 Connectors on the computer unit

Overview of the computer unit
The following illustration shows an overview of the computer unit.
xx1300000608
X1
X2 (yellow)
X3 (green)
X4
X5
X6
X7 (blue)
X9 (red)
X10, X11
Service port test middle
The service port is intended for service engineers and programmers connecting
directly to the controller with a PC.
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
Power supply
Service (connection of PC).
LAN1 (connection of FlexPendant).
LAN2 (connection of Ethernet based options).
LAN3 (connection of Ethernet based options).
WAN (connection to factory WAN).
Panel unit
Axis computer
USB ports (4 ports)
Note
It is not supported to connect multiple ports of the main computer (X2 - X6) to
the same external switch, unless static VLAN isolation is applied on the external
switch.
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation and commissioning
2.5.8 Connectors on the computer unit
Continues on next page
73