ABB IRC5 Product Manual page 121

3
4
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
Action
If not already in place, fit the EMC strips
on the SafeMove board.
Connect both SMB cables and both
Ethernet cables to the SafeMove board
before mounting the board. These con-
nections may be difficult to reach once
the board is mounted.
The two Ethernet connectors on the
SafeMove board are interchangeable (it
does not matter which is connected to
the main computer and which is connec-
ted to the axis computer).
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation and commissioning
2.9.6 Installing the SafeMove board DSQC 647
Note/illustration
xx0800000204
• A: EMC strips
xx0800000103
• A: SMB1 cable
• B: SMB2 cable
• C: Ethernet cables
Continued
Continues on next page
121