Recover From Emergency Stops - ABB IRC5 Product Manual

1.2.4 Recover from emergency stops

Overview
Recovering from an emergency stop is a simple but important procedure. This
procedure ensures that the robot system is not returned to production while
maintaining a hazardous condition.
Reset the latch of emergency stop buttons
All push-button style emergency stop devices have a latching feature that must
be released in order to remove the emergency stop condition of the device.
In many cases this is done by twisting the push-button as marked, but there are
also devices where you pull the button to release the latch.
Reset automatic emergency stop devices
All automatic emergency stop devices also have some kind of latching feature that
must be released. Consult your plant or cell documentation to see how your robot
system is configured.
Recover from emergency stops
1
2
3
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
Action
Make sure the hazardous situation that resulted in the emergency stop condition no
longer exists.
Locate and reset the device or devices that gave the emergency stop condition.
Press the Motors On button to recover from the emergency stop condition.
© Copyright 2007-2018 ABB. All rights reserved.
1.2.4 Recover from emergency stops
1 Safety
27