ABB IRC5 Product Manual page 93

2
3
4
Product manual - IRC5 Panel Mounted Controller
3HAC047137-001 Revision: J
2.5.14 Connecting a Limit switch override push button
Action
Attach two additional contact blocks on the
existing push button (Motors on).
Connect wires from the contact blocks to
the connector according to the diagram to
the right.
Fit the connector to the X23 connector on
the contactor interface board.
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation and commissioning
Note/illustration
A
B
C
xx0500002553
• A: Additional contact blocks
• B: Existing contact, lamp blocks
• C: Holder
• D: Push button
xx0500002556
xx0600003250
Continued
D
93