Siemens SINUMERIK 840DE sl Commissioning Manual page 693

Silent installation versions
setup.exe /v"/qn"
setup.exe /s /v"/qn"
setup.exe /v"/qn BASEONLY=1"
setup.exe /s /v"/qn BASEONLY=1"
setup.exe /v"/
qn BASEONLY=1 HELPFILES=0"
setup.exe /s /v"/
qn BASEONLY=1 HELPFILES=0"
Additional parameter assignments
Installation path
If you install the PC version of SINUMERIK Operate, then you can additionally specify the
installation path:
setup.exe /s /v"/qn INSTALLDIR=C:\Programme\testdir"
For spaces in the path:
setup.exe /s /v"/qn INSTALLDIR=\"C:\Program Files\testdir\""
Exit code
You can identify a successful installation or errors based on the exit code of the setup.exe call:
Exit code == 0
Exit code <> 0
Log file
During the installation you can generate a log file with /L:
setup.exe /s /v"/qb! /L*vx log.txt"
23.6 Setting the IP address of the NCU
From the user interface of the SINUMERIK Operate, you can set the IP address of the NCU
with which it should connect.
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
1. Select the "Start-up" operating area.
2. Press the "HMI" softkey and the ">>" softkey.
SINUMERIK Operate on PC/PCU
23.6 Setting the IP address of the NCU
Complete installation in the silent mode
(/s suppresses all of the setup messages)
Base installation in the silent mode with help files
(/s suppresses all of the setup messages)
Base installation in the silent mode without help
files
(/s suppresses all of the setup messages)
No error
Error
679