Siemens SINUMERIK 840DE sl Commissioning Manual page 537

There are two variants of cylinder surface transformation, i.e.
1. with groove side offset (ON)
2. without groove side offset (OFF)
Figure 21-1
21.4.5 Example: Milling machine with the XYZ-AC axis configuration
Example: Milling machine with the XYZ-AC axis configuration
Example of an axis configuration on the following machine:
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Grooves with and without groove side offset
Technologies and cycles
21.4 Milling
523