Siemens SINUMERIK 840DE sl Commissioning Manual page 663

21.10.5.2 Logging while measuring in the JOG mode
You can set the following setting data in the "Settings for Measurement Log" window for the
JOG mode.
References
Operating Manual, Turning/MIlling/Grinding; Chapter "Settings for the measurement result log"
Cycle channel setting data
SD55774 $SCS_J_MEA_PROTOCOL_FILE
//NC:/WKS.DIR/TEMP.WPD/J_MEAPROT.TXT
SD55740 $SCS_MEA_FUNCTION_MASK
Bit 28
Bit 29
21.10.5.3 Logging while measuring in the AUTOMATIC mode
Cycle channel setting data
SD55730 $SCS_MEA_PROTOCOL_USER_EXT
TXT
SD55614 $SCS_MEA_RESULT_MRD
= 0
= 1
Definition file: User GUD block
Data for user logs are generally logged from the S_PROTTXT[10] GUD array (PGUD).
If the data array is not sufficient, you can create a second array with the predefined name
S_USERTXT[n] in a separate GUD block (e.g. MGUD or UGUD):
DEF NCK STRING[200] S_USERTXT[n]
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Select new log or continuos log for measuring standard log in JOG
= 0 New log (default value)
= 1 Continuous, i.e. always attach to the existing log
Select file format for measuring standard log in JOG
= 0 Text format (default value)
= 1 Tabular format
Default setting
Switch off the measurement result display
Switch on the measurement result display (default value)
21.10 Measuring cycles and measurement functions
Name and path for the log file for measuring in JOG
Measuring cycles function screen, workpiece/tool
measurement
File extension for user log
Setting of the program control of the measurement
result display MRD
; n = number of field elements
Technologies and cycles
Default setting
649