Siemens SINUMERIK 840DE sl Commissioning Manual page 230

Tool management
12.2 Configuring the user interface
Entries
FirstEdge
StandBy
Active
Locked
Prewarning
RemainingPieces
MarkedToUnload
MarkedToLoad
Example
<FILTERCONFIGURATION>
<SOFTKEYLOCK>
</SOFTKEYLOCK>
</FILTERCONFIGURATION>
12.2.20 Configuring the "Load Station Selection" window
<LOADSTATIONSHANDLEALLTOOLS> tag
For functions "Delete all," "Unload all," and "Load all," you must specify a load station if multiple
load stations are configured in the magazine configuration of the NC. The load station is defined
in a dialog called "Select Load Station" or via the load station configuration with tag
<LOADSTATIONSHANDLEALLTOOLS>.
Entries
DialogEnabled
MAGAZINE_XXX
LoadStation
Example
<LOADSTATIONSHANDLEALLTOOLS>
<DialogEnabled value="true" type="bool" />
<MAGAZINE_1>
</MAGAZINE_1>
<MAGAZINE_2>
216
Meaning
Filter "Only first cutting edge," default setting "Edges"
Filter "Only tools that are ready to use," default setting "NewTool"
Filter "Only tools with active code," default setting "NewTool"
Filter "Only disabled tools," default setting "NewTool"
Filter "Only tools that have reached the pre-alarm limit," default setting "New‐
Tool"
Filter "Only tools with remaining quantity," default setting "NewTool Edges"
Filter "Only tools with unload identifier," default setting "NewTool Edges"
Filter "Only tools with load identifier," default setting "NewTool Edges"
<Locked value="NewTool Edges" type="QString" />
Meaning
Offer window "Load Station Selection," default setting "true"
Number of the magazine to which a load station will be assigned.
Load station to be assigned to the magazine.
<LoadStation value="2" type="uint" />
<LoadStation value="1" type="uint" />
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)