Siemens SINUMERIK 840DE sl Commissioning Manual page 133

Screen resolution
1280 x 768
1280 x 800
1280 x 1024
1300 x 768
1366 x 768
1440 x 1080
1454 x 1080
1854 x 1014
1854 x 1080
1920 x 1080
8.3 Configuring the display of the G-code groups
The "G-functions" pane is visible in the "Machine" operating area.
Up to a maximum of 16 G-code groups are displayed in this pane. Configure the
"slmagcodeconfig.ini" file accordingly to determine which G-code groups should be displayed,
and where.
Configuring G-code groups
Section
Selected G groups
Selected G groups ISO
mode
Enter the G-code group and position as follows:
SelectedGGroupN = M
N
M
Structure of the file
[Selected G-Groups]
SelectedGGroup1 = 1
SelectedGGroup2 = 2
SelectedGGroup3 = 3
SelectedGGroup4 = 4
SelectedGGroup5 = 5
SelectedGGroup6 = 6
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Maximum bitmap height
51
51
53
51
51
72
70
51
70
70
Meaning
This area is intended for operation of the controller in Siemens mode.
This area is intended for operation of the controller in ISO mode.
Position where G-code group M will be displayed.
If you want to leave a position empty, omit the number (M), e.g. "SelectedGGroup1 = "
The number of the G-code group to be displayed at position N
Customizing the "Machine" operating area
8.3 Configuring the display of the G-code groups
119