Siemens SINUMERIK 840DE sl Commissioning Manual page 68

General settings
3.14 Display Manager
Example extract of the file "slsidescreenmcppage_eng.ts"
...
<message>
<source>ON</source>
<translation>EIN</translation>
<chars>8</chars>
</message>
...
3.14 Display Manager
3.14.1 Display configurations
Using the Display Manager and display configurations, it is possible to reduce
SINUMERIK Operate, in other words, run in less than full-screen mode, and to allocate the
vacant space to other applications. These applications are either standard Windows
applications (.EXE) or applications that belong to the Display Manager. Both types of
applications can also be developed by third parties using the OA Toolkit from
SINUMERIK Operate and integrated into a display configuration. To display the applications,
the screen is divided into "frames". Each frame may contain an application or a menu for
controlling an application displayed in another frame. Several screen segments or "Displays"
are possible and you can navigate between them during the program runtime. These displays
are combined into a display configuration. There may be multiple display configurations, for
example, for different screen resolutions.
A display configuration is defined for a specific screen resolution. The available display
configurations must be made known to the system in the [displayConfigurations]
section of the systemconfguration.ini file. The display configuration itself is described
in a separate configuration file.
Example of the "systemconfiguration.ini" file
[displayConfigurations]
DC001 = res:=1366x768, file:=displayconfig_1366x768
DC002 = res:=1920x1080, file:=displayconfig_1920x1080
In this example, there are two display configurations for the resolutions 1920x1080 and
1366x768. The names of the entries always begin with the string "DC" followed by a sequential
number. Each entry has a "file" property that points to the file with the display configuration.
The name of the file is arbitrary. Similar to other configuration files, it is also searched for in
the cfg directories under oem and user. The ".ini" file extension does not have to be specified.
The "res" property indicates the resolution to which the respective display configuration applies.
If there is no display configuration for a resolution, the user interface is displayed full screen
at this resolution.
54
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)