Siemens SINUMERIK 840DE sl Commissioning Manual page 563

MD24905 $MC_TRANSMIT_ROT_AX_FRAME_1
= 2
MD24910 $MC_TRANSMIT_ROT_SIGN_IS_PLUS_1
= 0
MD24911 $MC_TRANSMIT_POLE_SIDE_FIX_1
= 1
MD24920 $MC_TRANSMIT_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
TRANSMIT with real Y axis
MD24100 $MC_TRAFO_TYPE_1
= 257
MD24110 $MC_TRAFO_AXES_IN_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1[ ]
[0] = 1
[1] = 3
[2] = 2
MD24900 $MC_TRANSMIT_ROT_AX_OFFSET_1
= 0
MD24905 $MC_TRANSMIT_ROT_AX_FRAME_1
= 2
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
Axial offset of the rotary axis is taken into account during TRANSMIT 1.
Sign of the rotary axis for the 1st TRANSMIT transformation.
Limitation of working range in front of/behind the pole, 1st TRANSMIT.
Definition of transformation 1 in the channel: TRANSMIT main spindle.
Perpendicular to the rotary axis XC
Rotary axis C1
Parallel to the rotary axis ZC
1st channel axis X
2nd channel axis Y
3rd channel axis Z
Offset of the rotary axis for the 1st TRANSMIT transformation.
Axial offset of the rotary axis is taken into account during TRANSMIT 1.
Technologies and cycles
Vector of the base tool for the 1st TRANS‐
MIT transformation.
Axis assignment for the 1st transforma‐
tion in the channel.
Assignment of the geometry axes to chan‐
nel axes for transformation 1.
21.5 Turning
549