Siemens SINUMERIK 840DE sl Commissioning Manual page 488

Service and diagnostics
18.12 Trace
or
Zoom in/zoom out area
18.12.5.5 Position the cursor
Using the cursor, you have the option of determining the precise values from a defined section.
To do this, the cursor is positioned directly on the curve.
Procedure
474
- OR -
Press the "Individually adapt Y" or "Adapt all" softkey if you only wish to
scale the Y value axis in the graphic window.
- OR -
Press the "Adapt Y together" softkey if you wish to adapt the value axis
of all characteristic graphs to the graphic window.
As all curves fill the complete window area, they are displayed superim‐
posed.
5. Press the "Zoom +" or "Zoom -" softkey until the desired display size is
reached.
Press the "Zoom area" softkey to define a specific section.
A frame is displayed.
Press the "Zoom +" or "Zoom -" softkey to change the frame step-by-step.
Press the "OK" softkey to display the zoom area.
1. A recording is opened in the "Trace" graphics window.
2. Press the "Cursor A" softkey.
The reference number, color of the variables and the color of the coordi‐
nate crossing point are displayed on the softkey.
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Operate (IM9)