Siemens SINUMERIK 840DE sl Commissioning Manual page 561

Cylinder surface transformation with groove side offset
MD24300 $MC_TRAFO_TYPE_3
= 513
MD24310 $MC_TRAFO_AXES_IN_3[ ]
[0] = 1
[1] = 3
[2] = 2
[3] = 6
MD24320 $MC_TRAFO_GEOAX_ASSIGN_TAB_3[ ]
[0] = 1
[1] = 3
[2] = 2
MD24800 $MC_TRACYL_ROT_AX_OFFSET_1
= 0
MD24805 $MC_TRACYL_ROT_AX_FRAME_1
= 2
MD24810 $MC_TRACYL_ROT_SIGN_IS_PLUS_1
= 1
MD24820 $MC_TRACYL_BASE_TOOL_1[ ]
[0] = 0
[1] = 0
[2] = 0
SINUMERIK Operate (IM9)
Commissioning Manual, 12/2017, 6FC5397-1DP40-6BA1
TRACYL main spindle
Perpendicular to the rotary axis XC
Rotary axis (main spindle) C1
Parallel to the rotary axis ZC
Parallel to the cylinder surface and perpendicular to the rotary axis ZC
1st channel axis X
2nd channel axis Y
3rd channel axis Z
Technologies and cycles
Definition of the 3rd transformation in the
channel.
Axis assignment for transformation 3.
Assignment of geometry axes to channel
axes for transformation 3.
Offset of the rotary axis for the 1st TRACYL
transformation.
Axial offset of the rotary axis is taken into
account during TRACYL.
Sign of the rotary axis for the 1st TRACYL
transformation.
Vector of the base tool for the 1st TRACYL
transformation.
21.5 Turning
547