Np_Color - Siemens SINUMERIK 840D sl Function Manual

6.2.4.5

$NP_COLOR

Function
Enter the protection area element-specific value for alpha/transparency and color (ARGB) in
the system variable. This value is used for the display of the protection area element on the
user interface. If a specific value is not parameterized for a protection area element, the
protection area-specific value from $NP_PROT_COLOR (Page 226) applies.
Structure
Alpha/transparency and color are specified as a double word in hexadecimal format:
AARRGGBB
● 1. - 3. Byte: RGB color value. See Chapter "Color chart (Page 219)".
● 4. Byte: Alpha channel or transparency value
OC
GG
RR
AA
1) 0 = transparent or not visible, 255
Syntax
$NP_COLOR[<n>] = <name>
Meaning
$NP_COLOR:
<m>:
<value>:
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
H
Byte Meaning
1
2 Green
3
4 Alpha channel or transparency
Alpha/transparency and color value of the protection area element
Data type:
Range of values: 00000000
Default value:
System variable or protection area element index
Data type:
Range of values: 0, 1, 2, ... ($MN_MM_MAXNUM_3D_PROT_AREA_ELEM -
Transparency and color value
Data type:
K8: Geometric machine modeling - only 840D sl
Blue
Red
1)
= FF = not transparent or filled
D H
DWORD
- FFFFFFFF
H
0000000 (black, not visible)
H
INT
1)
DWORD
6.2 Commissioning
Range of values
0 - 255 or 0 - FF
D H
H
237