Function-Specific Alarm Texts; Supplementary Conditions; I/O Modules - Siemens SINUMERIK 840D sl Function Manual

label1.LinkItem = "CLC[u1,1,9](" "!d%15.4lf" ")"
The format string can be modified if necessary.
The following code lines provide an example of how the variables supplied by means of NCDDE
access can be distributed on a field of labels:
For i = 0 To 8
label2.Caption[ i ] = Trim$(Mid$(label1.Caption, 1 + 15 * i, 15) )
Next
15.8

Function-specific alarm texts

For details of the procedure for creating function-specific alarm texts, see Section "Creating
alarm texts (Page 555)".
15.9

Supplementary conditions

15.9.1

I/O modules

The analog output voltage of the distance sensor for the A/D conversion must be connected
to the NC using an I/O module with an analog input.
Connection options
The SIMATIC ET 200S I/O for SINUMERIK 840D sl is connected via PROFIBUS DP. The
clearance sensor is connected via an analog S7 I/O module.
Figure 15-13 I/O modules connection for SINUMERIK 840D sl
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
TE1: Clearance control - 840D sl only
15.9 Supplementary conditions
597