6-Axis Kinematics - Siemens SINUMERIK 840D sl Function Manual

TE4: Handling transformation package - 840D sl only
17.5 Descriptions of kinematics
Table 17-15 Configuration data 5-axis NR kinematic
Machine data
MD62600 $MC_TRAFO6_KINCLASS
MD62605 $MC_TRAFO6_NUM_AXES
MD62603 $MC_TRAFO6_MAIN_AXES
MD62604 $MC_TRAFO6_WRIST_AXES
MD62606 $MC_TRAFO6_A4PAR
MD62601 $MC_TRAFO6_AXES_TYPE
MD62620 $MC_TRAFO6_AXIS_SEQ
MD62618 $MC_TRAFO6_AXES_DIR
MD62617 $MC_TRAFO6_MAMES
MD62607 $MC_TRAFO6_MAIN_LENGTH_AB
MD62612 $MC_TRAFO6_TIRORO_POS
MD62613 $MC_TRAFO6_TIRORO_RPY
MD62608 $MC_TRAFO6_TX3P3_POS
MD62609 $MC_TRAFO6_TX3P3_RPY
MD62610 $MC_TRAFO6_TFLWP_POS
MD62611 $MC_TRAFO6_TFLWP_RPY
MD62614 $MC_TRAFO6_DHPAR4_5A
MD62615 $MC_TRAFO6_DHPAR4_5D
MD62616 $MC_TRAFO6_DHPAR4_5ALPHA
See also
Definition of a joint (Page 638)
17.5.4

6-axis kinematics

6-axis kinematics usually imply 3 degrees of freedom for translation and 3 more for orientation.
This allows for the tool direction to be manipulated freely in space. Also, the tool can be rotated
along its own axis to the machining surface or inclined with a tilting angle.
This kinematic type is supported by the software, but only for very specific solutions as the
auxiliary method for this handling transformation package. A general, comprehensive and
universally applicable software version is still not available for 6-axis kinematics.
670
Value
1
5
3
2
0
[3, 3, 3, 3, 3, ...]
[1, 2, 3, 4, 5, 6]
[1, 1, 1, 1, 1, 1]
[0.0, 0.0, 0.0, 0.0, 0.0, 0.0]
[30.0, 300.0]
[0.0, 0.0, 500.0]
[0.0, 0.0, 0.0]
[500.0, 0.0, 0.0]
[0.0, 90.0, 0.0]
[0.0, -300.0, 0.0]
[-90.0, 0.0, 0.0]
[0.0, 0.0]
[0.0, 0.0]
[-90.0, 0.0]
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Special functions