Siemens SINUMERIK 840D sl Function Manual page 312

M3: Coupled axes
8.2 Curve tables - 840D sl only
Access to curve table segments
● Read start value (following axis value) of a table segment
CTABSSV(leading value, n, degrees, [following axis, leading axis])
● Read end value (following axis value) of a table segment
CTABSEV(master value, n, degrees, [following axis, master axis])
Note
If curve table functions such as CTAB(), CTABINV(), CTABSSV() etc., in synchronous
actions are used, only main traverse variable, e.g. $AC_PARAM[ ... ] or $R[ ... ] is
permissible for the return value and the argument "degrees" of the function.
Example:
ID=1 WHEN TRUE DO $R1 = CTABSSV(10, 1, $R2)
or
ID=1 WHEN TRUE DO $AC_PARAM[1] = CTABSSV(10, 1, $AC_PARAM[2])
Enable/cancel blocking
The following functions can be used to enable or cancel deletion and overwrite blocks for parts.
programs.
● Enable deletion and overwrite block.
General form: CTABLOCK(n, m, memType)
● Cancel deletion and overwrite block.
CTABUNLOCK releases the tables locked with CTABLOCK. Tables involved in an active
coupling remain locked, i.e. they cannot be deleted. However, the CTABLOCK command is
cancelled, i.e. the table can be deleted as soon as the coupling is deactivated. It is not
necessary to call CTABUNLOCK again.
General form: CTABUNLOCK(n, m, memType)
Applications of the forms:
Curve table with number n
CTABLOCK(n)
Curve tables in the number range n to m.
CTABLOCK(n, m)
All curve tables, irrespective of memory type
CTABLOCK()
All curve tables in the specified memory type
CTABLOCK(, , memType)
Curve table with number n
CTABUNLOCK(n)
Curve tables in the number range n to m.
CTABUNLOCK(n, m)
312
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Special functions