Siemens SINUMERIK 840D sl Function Manual page 526

T4: Automatic retuning with AST - only 840D sl
12.3 Programming
No. Parameters
2
<S_SZ_FILENAME>
Meaning: Name of the optimization file to be created (without path details, with file extension ".xml" or ".csv")
Examples:
● AXIS.xml
● PATH.xml
● SPEEDCTRL_PLANT.csv
● POSCTRL_MECHRESP.csv
Data type: STRING [100]
3
<S_I_CONTENT_TYPE>
Meaning: Specifies which optimization data should be saved in the created optimization file.
Data type: INT
Value: 0 =
1 =
2 =
3 =
4 =
4
<S_I_FORMATFILTER>
Meaning: Reserved
Data type: INT
5
<S_I_SUPPINFO>
Meaning: Reserved
Data type: INT
526
Not defined
Creates an XML file in which the axis-specific optimization data for the specified axis is saved.
The following data is included:
● Measuring conditions
● Measurement results
● Optimization strategy
● Optimization results
Creates an XML file in which the data for optimization of the path interpolation is saved.
The following data is included:
● List of all involved axes.
● Strategy for optimization of the path interpolation
Creates a CSV file in which the data for the frequency behavior of the speed-controlled system
is saved.
The data is stored as a 3-column table:
● Column 1: Frequency [Hz]
● Column 2: Linear amplitude
● Column 3: Phase [rad]
Creates a CSV file in which the data for the mechanical frequency response is saved.
The data is stored as a 3-column table:
● Column 1: Frequency [Hz]
● Column 2: Linear amplitude
● Column 3: Phase [rad]
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Special functions