Alarm Suppression (Cpmalarm) - Siemens SINUMERIK 840D sl Function Manual

M3: Coupled axes
8.5 Generic coupling
Note
The states in the columns for leading axes 1 and 2 also apply if there are several leading axes/
spindles, which have the same state with reference to the axis/spindle disable.
8.5.5.19

Alarm suppression (CPMALARM)

The CP keyword CPMALARM can be used to suppress coupling-related alarms.
Programming
Syntax:
Designation:
Functionality:
416
CPMALARM[FAx]= <value>
Coupling Mode Alarm
CPMALARM is a bit-coded CP keyword for suppressing special coupling-re‐
lated alarm outputs.
The bit combination operators B_OR, B_AND, B_NOT, and B_XOR can be
used to set individual bits.
Bit Value Meaning
0 = 1 Alarm 16772 is suppressed.
1 = 1 Alarm 16773 is suppressed.
2 = 1 Alarm 16774 is suppressed.
3 = 1 Alarm 22012 is suppressed.
4 = 1 Alarm 22013 is suppressed.
5 = 1 Alarm 22014 is suppressed.
6 = 1 Alarm 22015 is suppressed.
7 = 1 Alarm 22016 is suppressed.
8 = 1 Alarm 22025 is suppressed.
9 = 1 Alarm 22026 is suppressed.
10 = 1 Alarm 22040 is suppressed for the cyclic check in
case of previously activated position control for fol‐
lowing and leading spindles.
11 = 1 Alarm 16771 is suppressed.
12 - 31 Reserved.
The default values correspond to the settings in the machine data:
● MD11410 $MN_SUPPRESS_ALARM_MASK (mask for suppressing
special alarm outputs)
● MD11415 $MN_SUPPRESS_ALARM_MASK_2 (suppress alarm
outputs)
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Special functions