Switching On Leading Axes Of A Coupling Module (Cplon) - Siemens SINUMERIK 840D sl Function Manual

M3: Coupled axes
8.5 Generic coupling
Programming
Syntax:
Designation:
Functionality:
Following axis/
spindle:
Example:
Programming
CPOF=(X2)
Boundary conditions
● The switch command CPOF results in a preprocessing stop with active coupling.
Exception: CPSETTYPE="COUP" does not result in a preprocessing stop
● A CPOF switching command on an already deactivated or deleted coupling module has no
effect and is not executed.
● CPOF can be programmed in synchronous actions.
8.5.4.3

Switching on leading axes of a coupling module (CPLON)

CPLON activates the coupling of a leading axis to a following axis. If several leading axes are
defined for a coupling module, they can be activated and deactivated separately with
CPLON.
Programming
Syntax:
Designation:
Functionality:
Leading axis/
spindle:
382
CPOF= (<Following axis / spindle>)
Coupling Off
Deactivate the coupling of the following axis to all defined leading axes.
Type: AXIS
Range of values: All defined axis and spindle names in the channel
Comment
; Deactivation of coupling of following axis X2.
CPLON[FAx]= (<leading axis/spindle>)
Coupling Lead Axis On
Activates the coupling of a leading axis/spindle to following axis/spindle
FAx.
Type: AXIS
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
Special functions