Coupling Types (Cpsettype) - Siemens SINUMERIK 840D sl Function Manual

User specific adaptive cycles
If necessary (functional completion) the user can copy an adaptive cycle to the directory "CMA"
or "CUS" and apply changes there. When reading adaptive cycles, the sequence CUS → CMA
→ CST is observed and cycle variants are taken over on a first found basis, i.e. the adaptive
cycles copied into the directory CMA/CUS by the user are selected on a priority basis.
Note
When upgrading the NCK software, a log file is saved in the "CST" directory (Changelog),
indicating necessary changes of the adaptive cycles.
8.5.7.2

Coupling types (CPSETTYPE)

Coupling types
If presetting of coupling types (coupled motion, master value coupling, electronic gearbox and
synchronized spindle) is required, when creating the coupling module (CPON/CPLON or CPDEF/
CPLDEF), the keyword CPSETTYPE needs to be used also.
Programming
Syntax:
Designation:
Functionality:
Value:
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
CPSETTYPE[FAx]= <value>
Coupling Set Type
Defines the presettings of coupling characteristics (coupling type).
Type: STRING
Range of values:
"CP" Freely programmable
"TRAIL" Coupling type "Coupled motion"
"LEAD" Coupling type "Master Value Coupling"
"EG" Coupling type "Electronic gearbox"
"COUP" Coupling type "Synchronized spindle"
Default value: "CP"
M3: Coupled axes
8.5 Generic coupling
419