Installation Procedure - HP 98568A Installation Instruction

Installation Procedure
Select Code
and Interrupt
HP 98628A Datacomm Interface
Level Switches Default Switches
(see table for settings)
Figure 5-24.
98628A Datacomm Interface Switches
1.
Play It Safe.
a. Turn your computer off and unplug the power cord.
b. Remove the Datacomm Interface from its envelope, being careful to
handle the card only by its edges and metal end plate. The card may be
easily damaged by electrostatic discharge (static zap).
c. Place the card on the envelope.
2. Set the Select Code.
Adding Interface Cards 5-57