In Case Of Trouble - HP 98568A Installation Instruction

Installing RAM in a Model 350
In Case of Trouble
If you do not obtain the correct amount of available memory, first turn the
computer off and verify that the cards are plugged in correctly. Then turn it
back on and see if the amount of memory is correct. If it still is not, turn the
computer off and check the card addressing. If it is correct, set a card aside
and continue the process with the remaining cards.
If you still have trouble, verify that you have assigned the addresses correctly.
If you have, and no arrangement of cards will increase the amount of memory,
put the computer into use with the maximum amount of memory you can
obtain. Then replace all the unused cards in their anti-static bags and call your
HP Sales and Service office for assistance.
Note
You have now installed your RAM cards.
You are now ready to install the peripherals, if any, in
Chapter 4, "Accessory Cards". If you have installed all of
your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX
operating system.
3-26 Adding RAM