HP 98568A Installation Instruction page 264

HP 7936H/7937H Disk Drives
• If there is only one other disk or tape drive (besides this HP 7936H
or 7937H) already connected to the interface, set the switches to 2 as
shown in Figure 6-12, unless address 2 has been used elsewhere.
IJ · .
....
•
•
Address 2
Figure 6-12.
Address 2
• If there are two other disk or tape drives (besides this HP 7936H or
7937H) already connected to the interface, set the switches to 3 as
shown in Figure 6-13, unless address 3 has been used elsewhere.
I}
.
....
•
•
Address 3
Figure 6-13.
Address 3
4. Connect the Disk Drive Your Computer.
a. Find the HP-IB cable provided with the disk drive.
b. Connect one end of the HP-IB cable to the HP-IB socket on the back of
the disk drive. Tighten the thumb screws to secure the connection.
6-38 Adding Mass Storage Devices