HP 98568A Installation Instruction page 436

HP Terminals
Worksheet Entries
You have now installed your HP Terminal.
The following "Worksheet Entries" contain information needed to use your
terminal with the HP-UX operating system. Refer to the entry for the interface
you connected your terminal to.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Table 9-2.
If You Connected the Terminal to
a Series 300 Built-in Interface (Select Code 9) ...
Path*
File Major Minor
Device Name Name
Type Number number
Terminal
/dev/tty02
c 1
Ox090004
*
The path name given here assumes this is the second terminal you are
connecting (i.e., tty02). If this is not the case, change the path name
accordingly (e.g., /dev/tty03 for the third terminal, etc.).
9-12 Adding Terminals and Displays