HP 7978A Tape Drive
Table 6-20.
HP 7978A Tape Drive
Connected to HP 98625 Disk Interface (Select Code 14)
Path'"
File
Major
Minor
......
Device Name
Name
Type Number Number
HP 7978A, 6250 cpi, Berkeley, no rewind
/dev/rmt/#sO
c
9
OxOeOn83
HP 7978A, 6250 cpi, Berkeley, autorewind /dev/rmt/#sO
c
9
OxOeOn82
HP 7978A, 6250 cpi, AT&T, no rewind
/dev/rmt/#sO
c
9
OxOeOn81
HP 7978A, 6250 cpi, AT&T, autorewind
/dev/rmt/#sO
c
9
OxOeOn80
HP 7978A, 1600 cpi, Berkeley, no rewind
/dev/rmt/#sO
c
9
OxOeOn43
HP 7978A, 1600 cpi, Berkeley, autorewind /dev/rmt/#sO
c
9
OxOeOn42
HP 7978A, 1600 cpi, AT&T, .no rewind
/dev/rmt/#sO
c
9
OxOeOn41
HP 7978A, 1600 cpi, AT&T, autorewind
/dev/rmt/#sO
c
9
OxOeOn40
*
#
is a number that identifies the magnetic tape drive. Replace
#
with any
unique number (e.g., /dev/rmt/OsO for the first mag tape). Record the
numbers on the Chapter 6, "Mass Storage" tab.
**
n
is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace
n
with a 0 if the address was set to 0, use 2 if the
address was set to 2, and so on.
Adding Mass Storage Devices
6-63