Worksheet Entries; Spooled Printing - HP 98568A Installation Instruction

HP 2227 AlB QuietJ et Plus
and 2228A QuietJ et Printers
Worksheet Entries
You have now installed your HP 2227 A, 2227B or 2228A printer.
The following "Worksheet Entries" contain information needed to use your
printer with the HP-UX operating system.
Copy this information to a worksheet (worksheets are found at the end of
Chapter 1, "Getting Started") or remember to refer here when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Spooled Printing
For spooled printing, use the 2686a spooler model file. For unspooled printing,
insert the following shell commands into / etc/rc:
nohup sleep 2000000000 < /dev/lp2686
&
stty -parenb -ienqak es8 9600 -estopb -eloeal ixon opost onler tab3 <
/dev/lp2686
To configure the interface for raster graphics printing, execute the following
stty command (or equivalent ioctl(2) calls). Reissue the sequence above
after printing raster data.
stty -parenb -ienqak es8 9600 -estopb -eloeal ixon -opost
<
/dev/lp2686
Table 7-3.
HP 2227 A/28A
Connected to Series 300 Built-in Interface
Path File Major Minor
Device Name Name
Type
No. No.
HP 2227 A/28A, select code 9
/dev/lp2227a
c 1 Ox090004
7 -12 Adding Printers