Worksheet Entries; Spooled Printing - HP 98568A Installation Instruction

HP 2684
LaserJet
2000 Printer
Worksheet Entries
You have now installed your HP 2684 Printer.
The following "Worksheet Entries" contain information needed to use your
printer with HP-UX. Copy this information to a worksheet (worksheets are
found at the end of Chapter 1, "Getting Started") or remember to refer here
when you need it.
When finished, you'll be ready to install your next peripheral. If you have
installed all of your peripherals, refer to the Series 300 HP- UX System
Administration Tasks manual that came with your HP-UX operating system.
Spooled Printing
For spooled printing, use the 2686a spooler model file. For unspooled printing,
insert the following shell commands into / etc/rc:
nohup sleep 2000000000 < /dev/lp2684
&
stty -parenb -ienqak cs8 9600 -cstopb -clocal ixon opost onlcr tab3 <
/dev/lp2684
To configure the interface for raster graphics printing, execute the following
stty command (or equivalent ioctl (2) calls). Reissue the sequence above
after printing raster data.
stty -parenb -ienqak cs8 9600 -cstopb -clocal ixon -opost < /dev/lp2684
Table 7-10.
HP 2684
Connected to Series 300 Built-in Interface
Path File Major
Minor
Device Name
Name
Type Number Number
HP 2684, select code 9
/dev/lp2684 c 1 Ox090004
Adding Printers 7 -23