HP 98568A Installation Instruction page 454

HP 37212A 300/1200 Baud Modem
4. Select Your Interface and Cable.
The modem can be connected to any of the following RS-232C interfaces:
• Series 200 Model 216 or 217 built-in "Data Communications" interface-
use an HP 5061-4215 DTE cable.
• Series 300 built-in RS-232C interface-use an HP 13242N or 92221M
cable.
• HP 98626A RS-232C Interface-use an HP 5061-4215 (Option 001 DTE)
cable.
• HP 98628A Datacomm Interface-use an HP 5061-4215 (Option 001
DTE) cable.
• HP 98642A 4-Channel Multiplexer Interface, port 0 (HP-UX only)-
use an HP 92219S, 92218A or 92222M cable. Ports 1, 2 and 3 are not
recommended for use with the modem.
• HP 98644A RS-232C Serial Interface-use an HP 13242N, 92218A or
92222M cable.
5. Connect the Modem to Your Computer.
Connect the cable between the modem and the interface.
6. Connect the Power Cord.
Connect the power cord into the power connector on the back of the
modem, and plug the other end into your power outlet.
7. Set the Front Panel Buttons.
a. Turn the modem on.
b. Locate the set of four buttons labeled HS, ALB, RDL, and DATA on the
front of the modem.
c. Set these buttons as follows:
• Push the HS button in .
• Leave the ALB, RDL and DATA buttons out.
10-12 Adding Miscellaneous Peripherals