HP 98568A Installation Instruction page 301

HP 9125S/9127 A Flexible Disk Drives
Table 6-25.
HP 9125S/27 A Flexible Disk Drive
Connected to HP 98624 HP-IB Interface (Select Code 8)
Path File Major Minor Interleave
Device Name
Name *
Type Number Number **
Factor
HP 9125S/27A
/dev/dsk/#sO
b
0
Ox080nOO
2
HP 9125S/27 A
/dev/rdsk/#sO c
4
Ox080nOO
2
*
**
#
is a number that identifies the disk drive (e.g., 0 for the root disk, 1 for
the next disk installed, etc.). Replace
#
with any unique number, and
use the same number in both the /dev/dsk and /dev/rdsk entries (e.g.,
/dev/dsk/1s0 and /dev/rdsk/1s0). Record the numbers on the Chapter 6,
"Mass Storage" tab.
n is a number that identifies the address (set in step 3 of the Installation
Procedure). Replace n with a 0 if the address was set to 0, use 2 if the
address was set to 2, and so on.
Adding Mass Storage Devices 6-75