HP 98568A Installation Instruction page 192

HP 98548/49/50A High Resolution Video Boards
Installation Procedure
1. Play It Safe
a. Turn your computer OFF and unplug the power cord.
b. Remove the High Resolution Video Board from its envelope, being careful
to handle the card only by its edges. The card may be easily damaged by
electrostatic discharge (static zap).
c. Place the card on the envelope.
2. If you are upgrading a computer which has video furnished by a combination
processor/video board, continue with this step. Otherwise, skip to step 3.
a. Turn the monitor power OFF and disconnect the existing monitor and
video cable.
b. Remove the top wide slot cover plate from the back of the computer (see
Figure 5-36).
5-96 Adding Interface Cards
Remove the Processor Board from slot A
and install it in slot B.
Figure 5-36.
Processor Board Placement