LG MULTI V ARNU07GTUA4 Engineering Product Data Book page 103

Indoor unit
10. Installation
NOTE:
• Avoid the following installation location.
1. Such places as restaurants and kitchen where considerable amount of oil steam and flour is generated.
These may cause heat exchange efficiency reduction, or water drops, drain pump mal-function.
In these cases, take the following actions;
• Make sure that ventilation fan is enough to cover all noxious gases from this place.
• Ensure enough distance from the cooking room to install the air conditioner in such a place where it may not suck oily steam.
2. Avoid installng air conditioner in such places where cooking oil or iron powder is generated.
3. Avoid places where inflammable gas is generated.
4. Avoid place where noxious gas is generated.
5. Avoid places near high frequency generators.
Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
• The following parts are locally purchased.
① Hanging Bolt
- W 3/8 or M10
② Nut
- W 3/8 or M10
③ Spring Washer - M10
④ Plate Washer - M10
40 _
Ceiling Cassette 4-way
Air conditioner
Take enough
distance
Keep the length of the bolt
from the bracket to 40mm
Flat washer for M10
(accessory)
Ceiling board
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)
Use the ventilation fan
for smoke-collecting
hood with sufficient
capacity.
Cooking table
Ceiling
Air Conditioner body
Keep the length of 15~18mm
between the air conditioner bottom
surface and the ceiling surface
Set screw of
paper model (4 pieces)
Open the ceiling board
Paper model
along the outer edge of the
for installation
paper model
CAUTION
• Tighten the nut and bolt to prevent the unit
from falling.
Ceiling board